|
Avon S3-40 Floorboard Drawings?
Just bought an Avon S3-40 sportboat, made in 1983. In amazing condition except for the ply floor, especially the joints between the front trapezoidal panel and the first square panel. The floor may not be original either and was extremely difficult to remove. The PO thought it was not original and that it was too long for the boat. And it has so far proved impossible to re-install despite having read every relevant thread on here about doing it.
I have all the aluminum bits and would like to make a new set of floor panels. Does anyone have drawings or dimensions for the originals or know where they can be found? I can't really use the ones I have as accurate templates as they are pretty roughly made, have broken edges on the joints noted above and anyway seem to be slightly oversized. Incidentally my floor is 9mm ply and has no stiffeners on the back. The ply matches the slot in the stringers which is 12mm.
__________________
|
