Bravo pump glitch

simonafloat · 27 June 2022, 19:24

Hi all, been a while since i posted.

Got issues with my bravo pump, its the btp12 turbo. Basically it sometimes kicks in amd sometimes doesn't. There are two relays that make a horrible buzzing sound on the pcb so i figure that must be the issue. Anyone had any joy with replacing them? Thanks.

FoxZulu · 27 June 2022, 19:54

We have a BTP digital and had the same problem a couple of years ago. Long story short, it was caused by not getting a full 12 volt input. If we tried running it from the boat battery that had been left for a few weeks it would start in the first phase then cut out. I then plugged it into the car 12v outlet with the engine running and it ran perfectly, and still does.

Hope this helps.

Fenlander · 27 June 2022, 20:06

I'd agree. Either a below par small battery if that's what you're using... or too long a lead if connecting to the car with an extension.

FoxZulu · 27 June 2022, 20:19

I made up an extension to connect to the car but as long as the car engine is running it's absolutely fine.

simonafloat · 27 June 2022, 20:58

Thanks all, i'm sure the van battery is ok but i'll try running the engine to make sure. Could be rusty crocodile clips too i guess.