presure guage dilema!!!!

[dave3235]

Hope some one can help.Just ordered a .5 bar inline presure gauge for my honwave 3.5 would this be ok or will I need to send it back

[The Bass Stalker]

so long as you need less than .5 bar then you'll be fine. What's the problem?

[dave3235]

The problem is im not 100% what the presure should be as I have lost my manual,I think it is.35 bar for keel and .25 for outer tubes any help

[The Bass Stalker]

Sounds about right so you should be fine. My quicksilver 430 is .25 tubes and .44 keel. What boat is it?

[dave3235]

Honwave 3.5

[henryfreston]

ye i had a honwave, if its aluminium deck then the keep is .35 bar and the tubes are .25.

So you will be fine

[dave3235]

Originally Posted by henryfreston

ye i had a honwave, if its aluminium deck then the keep is .35 bar and the tubes are .25.

So you will be fine

Yes thats the one many thanks

[Locozodiac]

If not planing to inflate any air deck, stay with it, it's more accurate to monitor a less psi on a less bar/psi scale than same less psi on a larger bar/psi scale.

Happy Boating