Reply
 
Thread Tools Search this Thread
 
Old 01 March 2013, 12:05   #1
Member
 
Country: UK - England
Town: Lancashire , Scotland
Boat name: TARKA
Make: Humber Destroyer
Length: 5m +
Engine: 3.3,75
Join Date: Jun 2011
Posts: 196
Quicksilver 340 Airdeck Help Please

Hi All,

I have recently bought a used Quicksilver 340 Airdeck.

I have discovered under the air floor there should be a "Thrust Board" unfortunatly it is missing Arghh !.

Does Anyone owns a 340 who could accuratly measure their one for me so I can make a new one over the weekend ? Please Please

I am not sure if its a true rectangle shape or not , One side may be longer than the other ?

Please help Thankyou !!
__________________
Alzi is offline   Reply With Quote
Old 01 March 2013, 12:37   #2
RIBnet admin team
 
willk's Avatar
 
Country: Ireland
Length: 4m +
Join Date: Feb 2008
Posts: 14,882
It's a trapezoid as you suspected. I have the 2.7m so can't give you precise dimensions. However, it sits loosely in the hoops of the airdeck and should fit snuggly under the inflated tubes where they meet the bottom "hull" skin seam. The edges are chamfered, sanded and painted/varnished to avoid fraying the tubes. The keel tube fits below this thrust board and pushes up against it with some force. I can't see the boat working well without it while planing.

The material is light ply - without checking I'd say 10mm?

HTH
__________________
willk is offline   Reply With Quote
Old 03 March 2013, 12:11   #3
Member
 
Country: UK - England
Town: Lancashire , Scotland
Boat name: TARKA
Make: Humber Destroyer
Length: 5m +
Engine: 3.3,75
Join Date: Jun 2011
Posts: 196
Thankyou WillK
__________________
Alzi is offline   Reply With Quote
Old 04 March 2013, 16:24   #4
Member
 
Country: UK - England
Town: Lancashire , Scotland
Boat name: TARKA
Make: Humber Destroyer
Length: 5m +
Engine: 3.3,75
Join Date: Jun 2011
Posts: 196
still need dimensions ......
__________________
Alzi is offline   Reply With Quote
Old 04 March 2013, 17:01   #5
RIBnet admin team
 
willk's Avatar
 
Country: Ireland
Length: 4m +
Join Date: Feb 2008
Posts: 14,882
Just a thought - inflate the SIB with the floor upside down. Mark the strap locations on the tubes in tape, remove the deck and make a template from heavy cardboard.
__________________
.
willk is offline   Reply With Quote
Old 06 March 2013, 07:20   #6
Member
 
Country: Canada
Make: Mercury Airdeck 340
Length: 3m +
Engine: Mercury 20hp
Join Date: May 2012
Posts: 20
PM your email and I can send photos of the board with measurements next weekend.
__________________
lineofsight is offline   Reply With Quote
Old 06 March 2013, 23:23   #7
Member
 
Country: UK - England
Town: Lancashire , Scotland
Boat name: TARKA
Make: Humber Destroyer
Length: 5m +
Engine: 3.3,75
Join Date: Jun 2011
Posts: 196
PM Sent , Thanks !!
__________________
Alzi is offline   Reply With Quote
Old 12 March 2013, 22:07   #8
Member
 
Country: UK - England
Town: Lancashire , Scotland
Boat name: TARKA
Make: Humber Destroyer
Length: 5m +
Engine: 3.3,75
Join Date: Jun 2011
Posts: 196
Any Dimensions Anybody , Please
__________________
Alzi is offline   Reply With Quote
Old 12 March 2013, 23:00   #9
Member
 
Country: UK - England
Town: Sompting
Make: quicksilver 310
Length: 3m +
Engine: Yamaha 15HP
Join Date: Nov 2011
Posts: 190
i wondered what the hoops on my 310 were for, mine must be missing too

anyone got dimensions for that one
__________________
ukprometheus is offline   Reply With Quote
Old 12 March 2013, 23:13   #10
RIBnet admin team
 
willk's Avatar
 
Country: Ireland
Length: 4m +
Join Date: Feb 2008
Posts: 14,882
If the developing bend in my thrust board is anything to go by (), you pair would wanna get a wiggle on and start fettling...
__________________
willk is offline   Reply With Quote
Old 12 March 2013, 23:32   #11
Member
 
Country: UK - England
Town: Sompting
Make: quicksilver 310
Length: 3m +
Engine: Yamaha 15HP
Join Date: Nov 2011
Posts: 190
Quote:
Originally Posted by willk View Post
If the developing bend in my thrust board is anything to go by (), you pair would wanna get a wiggle on and start fettling...
thanks willk forever helpful
__________________
ukprometheus is offline   Reply With Quote
Old 12 March 2013, 23:34   #12
Member
 
Country: UK - England
Town: South Coast
Make: Quicksilver
Length: 3m +
Engine: outboard
Join Date: Feb 2006
Posts: 142
83cm X 20cm X12mm found it on boats.net has pic and part numbers
__________________
Sunstreaker is offline   Reply With Quote
Old 12 March 2013, 23:39   #13
Member
 
Country: UK - England
Town: Sompting
Make: quicksilver 310
Length: 3m +
Engine: Yamaha 15HP
Join Date: Nov 2011
Posts: 190
Quote:
Originally Posted by Sunstreaker View Post
83cm X 20cm X12mm found it on boats.net has pic and part numbers
is that the 310 or the 340
__________________
ukprometheus is offline   Reply With Quote
Old 12 March 2013, 23:52   #14
Member
 
Country: UK - England
Town: South Coast
Make: Quicksilver
Length: 3m +
Engine: outboard
Join Date: Feb 2006
Posts: 142
It was for 340, but 310 seems to come up with same dimensions
__________________
Sunstreaker is offline   Reply With Quote
Old 13 March 2013, 00:05   #15
Member
 
Country: UK - England
Town: Sompting
Make: quicksilver 310
Length: 3m +
Engine: Yamaha 15HP
Join Date: Nov 2011
Posts: 190
Quote:
Originally Posted by Sunstreaker View Post
It was for 340, but 310 seems to come up with same dimensions
cheers bud
__________________
ukprometheus is offline   Reply With Quote
Old 13 March 2013, 06:31   #16
Member
 
Country: Canada
Make: Mercury Airdeck 340
Length: 3m +
Engine: Mercury 20hp
Join Date: May 2012
Posts: 20
Dimensions

This one is a spare I picked up from Defender for $25 (overlaid it over the one in the boat and is identical), for the price figured would do something else with the time (tunnels for boy's train set). Note that it is vinyl wrapped thus need to deduct 0.5" from the lengths in the photo to arrive at the dimensions of the wood.

Trapezoid: height 8", bottom 34", top 33", thickness 0.5"

Quote:
Originally Posted by Sunstreaker View Post
83cm X 20cm X12mm found it on boats.net has pic and part numbers
This seems to suggest the board is rectangular, as per the attached photo it is a trapezoid.
Attached Files
File Type: pdf DSC_0100.pdf (274.8 KB, 210 views)
__________________
lineofsight is offline   Reply With Quote
Old 13 March 2013, 19:05   #17
Member
 
Country: UK - England
Town: South Coast
Make: Quicksilver
Length: 3m +
Engine: outboard
Join Date: Feb 2006
Posts: 142
I may get to see one on Friday and can clarify whether its trapezoid or rectangle. The microfiche schematic looks like a rectangle . It's quoting quicksilver mercury marine, and is also stating the same part for Loadstar & some other models.
__________________
Sunstreaker is offline   Reply With Quote
Old 13 March 2013, 19:21   #18
Member
 
Country: UK - England
Boat name: ShaarkBait
Make: Zodiac 3.6 FR
Length: 3m +
Engine: Mariner 9.9 4-stroke
Join Date: Nov 2012
Posts: 364
I would just drop EP Barrus an email. They have always been excellent about sending me CAD drawings of bits that I have requested.
__________________
IanH is offline   Reply With Quote
Old 13 March 2013, 19:23   #19
Member
 
Country: Canada
Make: Mercury Airdeck 340
Length: 3m +
Engine: Mercury 20hp
Join Date: May 2012
Posts: 20
Quote:
Originally Posted by Sunstreaker View Post
I may get to see one on Friday and can clarify whether its trapezoid or rectangle. The microfiche schematic looks like a rectangle . It's quoting quicksilver mercury marine, and is also stating the same part for Loadstar & some other models.
Yes that would certainly be helpful, because Willk who stated it was a trapezoid (post #2) and Lineofsight who posted a photo (post #16) with the measuring tapes showing the dimensions are probably in collusion wanting a good laugh by tricking people into a trapezoid thrust board...
__________________
lineofsight is offline   Reply With Quote
Old 13 March 2013, 21:54   #20
RIBnet admin team
 
willk's Avatar
 
Country: Ireland
Length: 4m +
Join Date: Feb 2008
Posts: 14,882
Quote:
Originally Posted by lineofsight View Post
Yes that would certainly be helpful, because Willk who stated it was a trapezoid (post #2) and Lineofsight who posted a photo (post #16) with the measuring tapes showing the dimensions are probably in collusion wanting a good laugh by tricking people into a trapezoid thrust board...
Do you think they bought our story?

Frankly, it's a simple job to make one and this whole thread is overkill...
__________________
willk is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off




All times are GMT. The time now is 00:01.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.