Quicksilver SIB refurb advice wanted...

[Dydigital]

Hi all,

below is a pic of my boat, I want to some refurb work but want some advice on what to buy and where to start.

[Ribstore]

Hi, can you outline what refurb works you need/want to do?

Is she holding air ok?

[Dydigital]

Sorry should of mentioned, I would like to clean it up, bring back some of the colour if I can. Also noticed a few cracking in the rubber not sure if they can be treated or should be patched. I have seen some photos online of before and after and some look nearly new after. I don't want perfect just to look a bit more tidy.

[Ribstore]

Originally Posted by Dydigital

Sorry should of mentioned, I would like to clean it up, bring back some of the colour if I can. Also noticed a few cracking in the rubber not sure if they can be treated or should be patched. I have seen some photos online of before and after and some look nearly new after. I don't want perfect just to look a bit more tidy.

A wipe over with MEK solvent or acetone and then a few coats of a good conditioner/protector, and she will look far better - check out our cleaning guide

'Cracking of rubber'? Any pics?

Cheers

[Dydigital]

Can get acetone from the gf 's mother. I found your conditioner on eBay, am I best to by from eBay or your website?

[A1an]

Il second Rib Store Conditioner.

It brought tubes up like new.

[Dydigital]

It brought the colour back?

[A1an]

Very much so, from pink to bright red.

[Dydigital]

I'm sold... Will order some and stick it on my todo list. After finishing my camper conversion, the gf's mini, my kayak mods and the sib trailer... Lol

[Ribstore]

Originally Posted by A1an

Il second Rib Store Conditioner. It brought tubes up like new.

Cheers A1an...Good to hear that the Hypatec did the job

Originally Posted by Dydigital

After finishing my camper conversion, the gf's mini, my kayak mods and the sib trailer.

Keep the misses happy n the rest falls into place...well, that's my approach