Looking for advice on a repair I'm doing. My inflatable was attacked by mice while in storage. I've successfully patched the others but this one seems like it's going to be a challenge. Would very much appreciate any advice!
The hole is about 12mm long and a few wide. It's tucked up under the left rear pontoon where it meets the transom.
Looking for advice on a repair I'm doing. My inflatable was attacked by mice while in storage. I've successfully patched the others but this one seems like it's going to be a challenge. Would very much appreciate any advice!
The hole is about 12mm long and a few wide. It's tucked up under the left rear pontoon where it meets the transom.
Cut a hole in a spot with easy access and fix it from the inside.
__________________
Richard
Gluing geek since 2007
Opinions and intepretations expressed are solely my own and do not express the views or opinions of my employer
Patch from behind...... You can cut the hole abit bigger leaving you a bit more space to fit a patch from behind.. I would roll the patch up like a cigarette then unroll once inside..
Never would have occurred to me! I'll give it a shot should work perfectly for this patch. Thank you very much guys for taking the time and your advice!
