Reply
 
Thread Tools Search this Thread
 
Old 19 May 2013, 21:00   #1
Member
 
Country: UK - England
Town: Dorset & Hants
Boat name: Streaker/Orange
Make: Avon/Ribcraft
Length: 4m +
Engine: 50Yam/25 Mariner
Join Date: Apr 2007
Posts: 5,551
SIB club special ?

A little drive along the coast today for the latest SIB purchase ..... only a select few have 2 380s....especially when one is grey

Had an odd aluminium floor in it ( actually quite well done) , but that's going ( if you want it PM me) .

Had some OK home made SS swing up launching wheel mounts

And a Garmin etrex..( don't think I'll get it fired up )

Air floor seems to hold air OK ,some TLC needed on the boat overall as it was fished from ( bloody fish slime..what sort or ribnobber fishes !!! oh hang on... ..and left inflated in a garden so some general mud/ slime to clean off ( FPS tomorrow )

Tomorrow I'll know for sure about it holding air..but anything is fixable ...

for some reason RIBnet isn't resizing my pics for me ..except the garmin...hmmm

If anyone wants to give me a 15 2 stroke ...I can look after it for a while ..settle for 10 ?
Attached Thumbnails
Click image for larger version

Name:	20130519_200246.jpg
Views:	253
Size:	87.9 KB
ID:	80163  
__________________
PeterM is offline   Reply With Quote
Old 19 May 2013, 21:13   #2
Member
 
Country: UK - England
Town: Royal Wootton Bassett
Length: 8m +
Engine: 250
Join Date: Jul 2008
Posts: 8,047
FPS the GPS too
__________________
whisper is offline   Reply With Quote
Old 19 May 2013, 21:20   #3
Member
 
Country: UK - England
Town: Dorset & Hants
Boat name: Streaker/Orange
Make: Avon/Ribcraft
Length: 4m +
Engine: 50Yam/25 Mariner
Join Date: Apr 2007
Posts: 5,551
Quote:
Originally Posted by whisper View Post
FPS the GPS too
Will do. Emailed you about trailer. ..
__________________
PeterM is offline   Reply With Quote
Old 19 May 2013, 21:43   #4
Member
 
Nick Hearne's Avatar
 
Country: UK - England
Town: Bucks
Boat name: Blue & Ding Dong
Make: Ribeye,SR4 & Bombard
Length: 6m +
Engine: 115,50 & 15Hp Yams
Join Date: Feb 2004
Posts: 3,252
Quote:
Originally Posted by whisper View Post
FPS the GPS too

Is this some sort of sib code?



I saw the listing for this one but I keep telling myself I have enough boats as it is
__________________
Member of the Ribeye supporters club!!!
Member of Bombard 380 Aerotec club
Member of SR4 club
Nick Hearne is offline   Reply With Quote
Old 19 May 2013, 21:54   #5
Member
 
Country: UK - England
Town: Royal Wootton Bassett
Length: 8m +
Engine: 250
Join Date: Jul 2008
Posts: 8,047
Quote:
Originally Posted by Nick Hearne View Post

Is this some sort of sib code?



I saw the listing for this one but I keep telling myself I have enough boats as it is
Fairy Power Spray the Global Positioning System
__________________
whisper is offline   Reply With Quote
Old 19 May 2013, 21:57   #6
Member
 
Nick Hearne's Avatar
 
Country: UK - England
Town: Bucks
Boat name: Blue & Ding Dong
Make: Ribeye,SR4 & Bombard
Length: 6m +
Engine: 115,50 & 15Hp Yams
Join Date: Feb 2004
Posts: 3,252
Quote:
Originally Posted by whisper View Post
Fairy Power Spray the Global Positioning System
Are got you it was the FPS that had me, glad to say GPS I did know
__________________
Member of the Ribeye supporters club!!!
Member of Bombard 380 Aerotec club
Member of SR4 club
Nick Hearne is offline   Reply With Quote
Old 20 May 2013, 13:31   #7
RIBnet admin team
 
Nos4r2's Avatar
 
Country: UK - England
Town: The wilds of Wiltshire
Boat name: Dominator
Make: SR5.4
Length: 7m +
Engine: Yam 85
MMSI: 235055163
Join Date: Jul 2005
Posts: 13,069
RIBase
Don't FPS the GPS, spray some corrosion block spray into it if it doesn't have batteries in, then leave it a few hours and try powering it up. The stuff sometimes works wonders on electronics.
__________________
Need spares,consoles,consumables,hire,training or even a new boat?

Please click HERE and HERE and support our Trade Members.

Join up as a Trade member or Supporter HERE
Nos4r2 is offline   Reply With Quote
Old 20 May 2013, 13:44   #8
Member
 
Country: UK - England
Town: Dorset & Hants
Boat name: Streaker/Orange
Make: Avon/Ribcraft
Length: 4m +
Engine: 50Yam/25 Mariner
Join Date: Apr 2007
Posts: 5,551
Quote:
Originally Posted by Nos4r2 View Post
Don't FPS the GPS, spray some corrosion block spray into it if it doesn't have batteries in, then leave it a few hours and try powering it up. The stuff sometimes works wonders on electronics.
Haha. ..If you could see it. ... you'd see no amount of spray will help it. .. It was once water proof. .Now I can hear the water inside it and can't get it out. I can't even turn the nob on the back to get the batteries out. I think it was submerged for a good year or two.
__________________
PeterM is offline   Reply With Quote
Old 20 May 2013, 14:41   #9
RIBnet admin team
 
Nos4r2's Avatar
 
Country: UK - England
Town: The wilds of Wiltshire
Boat name: Dominator
Make: SR5.4
Length: 7m +
Engine: Yam 85
MMSI: 235055163
Join Date: Jul 2005
Posts: 13,069
RIBase
aaaah...ok...
__________________
Need spares,consoles,consumables,hire,training or even a new boat?

Please click HERE and HERE and support our Trade Members.

Join up as a Trade member or Supporter HERE
Nos4r2 is offline   Reply With Quote
Old 22 May 2013, 20:30   #10
Member
 
Country: UK - England
Town: Dorset & Hants
Boat name: Streaker/Orange
Make: Avon/Ribcraft
Length: 4m +
Engine: 50Yam/25 Mariner
Join Date: Apr 2007
Posts: 5,551
Found some time to spend on this tonight . I feel it is going to keep me amused for at least a few weeks

The boat itself seems to hold air apart form one small pin hole on the underside of one tube, it does however have some existing repairs which work , but don't look great ( and one in red in the underside of a grey tube ) . I feel just minor TLC needed on the boat really. A quick FPS and it comes up fine ( but I've run out)

The floor....is another storey... I can see me having to search for the thread on Nashers revenge repairs and having to get some grey PVC and glue . Similar to Nashers 380 the floor needs a couple of patches...tricky, but with patience and prep all should be OK . Looks like an 'attempt' has been made by simply pouring glue over the holes ...so some cleaning up to on that !

So need to get Acetone, PVC material and glue and some time in dry . warm weather and all 'should' be fine. BUt when I get fed up with it I'll be open to offers ....
Attached Thumbnails
Click image for larger version

Name:	20130519_195625.jpg
Views:	197
Size:	193.0 KB
ID:	80276   Click image for larger version

Name:	20130519_195633.jpg
Views:	189
Size:	280.9 KB
ID:	80277  
__________________
PeterM is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off




All times are GMT. The time now is 12:53.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.