2014 pac22 rebuild

[sparkyr6]

Hi all,I have currently aqquired a 2014 prototype pac 22 that was 30kg to heavy so sent to the dark parts of the dockyard and disassembled ,
We have a fair few parts missing ie engine / jet drive front console and a few smaller parts.
We do have things like the dash , jack shaft parts of the jet and all frames tubing and engine box.


We are looking for someone to rebuild her back to original spec to a turn key state of repair.
Photos can be supplied and also tech data can be sourced.
Any companies out there willing to take on this project please contact me ASAP.
Many thanks for reading this
Martin

[Maximus]

Originally Posted by sparkyr6

Hi all,I have currently aqquired a 2014 prototype pac 22 that was 30kg to heavy so sent to the dark parts of the dockyard and disassembled ,
We have a fair few parts missing ie engine / jet drive front console and a few smaller parts.
We do have things like the dash , jack shaft parts of the jet and all frames tubing and engine box.


We are looking for someone to rebuild her back to original spec to a turn key state of repair.
Photos can be supplied and also tech data can be sourced.
Any companies out there willing to take on this project please contact me ASAP.
Many thanks for reading this
Martin

Sounds like a Nugents Gig to me???

[Mat856]

Get some pics up.

[sparkyr6]

Hi guys thanks for the response , I'm a newbie on here so will try to work out how to upload pics !!! Please bere with me

[sparkyr6]

Well there's 1

[sparkyr6]

And hopefully nO 2

[sparkyr6]

These are a few more

[sparkyr6]

And this one !!

[sparkyr6]

Hi Maximus , who's Nugents ??

[Mat856]

Try benr

[Searider]

Is that around the back of the angling club?
Poked my nose in whilst looking at something else and was amazed at how compact they look without the tubes.

[sparkyr6]

Hi searider , depends which club you talking about , but yes you are right they are very compact , it's supprising how wide the tubes are

[mick]

Don't let Shinyshoe see that light board he might call round and give you a slap

[ShinyShoe]

Nah, it was my lawyers who were being sent to do the slapping and only if I crashed into it...

[beamishken]

Do you know what your getting into there is probably north of 20k to spend to get that anywhere near running

[sparkyr6]

Yes we know and do have a budget ,I know what the early 2000 models go for so as this is a year old hull etc I think it would be worth the £20k

[Mat856]

A new yanmar will cost u nearly £15,000 mate. I think it will be worth doing, ribcraft are selling a refurbished mk2 pac22 for £45,000 plus vat. I would budget 25,000-30,000 to fit it out depending if u have tubes or not. Iv been under going a rebuild on my pac22 for the last 3months and put a outboard on. It is being built to be a coded vessel but I think it's gonna cost me £18,000 ish in the end. The way to look at it is if u wanted to buy the equivalent new ribcraft or other makes u would prob be spending £60,000-70,000

[sparkyr6]

Hi Mat,
Thanks for the advise ,
I have managed track down a yanmar diesel and jet combo for £10k so that is one option but not sure if the jet is the original spec ??
We have the tubes and are obviously brand new as this craft was only ever in the water for sea trials so save a few k there I think,
Main thing I'm concerned about is the forward console ,tracked down halmatics contact and they don't exist no more 😪😪😪
Any ideas will be much appreciated.

[Mat856]

I would think a console would be easy to find as a lot of people change them for a two man stand behind. Are u going for the 200hp yanmar

[sparkyr6]

Yes the original spec was a 200 yanmar unfortunatly the heritage guys gave it to the sea scouts to play with !!! Am trying to contact them and make a large donation if they want to part with it .