Atlantic 21 in the Netherlands

[J.W.W.]

Together with a mate, we got the chance to jump into this project: an Atlantic 21.
The hull is beautiful, but yhe deck needs to be replaced and the tubes too.
All kind off advice is welcome!
Regards, Wouter

[J.W.W.]

Took some pictures with the mobile phone.
A bit of fog on them, but just to get an idea:

[Trailer Guy]

This may be of inspiration:

http://www.rib.net/forum/f8/atlantic...ect-46676.html

[J.W.W.]

Thanks!
Followed this allready during the project offcourse..
@Nugent: Why are you actually selling so quick again?

Are there actually more Atlantic owners on this forum?

Originally Posted by Trailer Guy

This may be of inspiration:
http://www.rib.net/forum/f8/atlantic...ect-46676.html

[benjytaylor]

Been busy stripping my Atlantic 21 down today.

[J.W.W.]

Hi Ben,
that one looks a lot better then ours!
What are you going to be stripping? Just the engines, or the consoles too?

[benjytaylor]

The console Is coming off as we speak. Leaving a fair but of kit on it still. - VHF, garmin fish finder, seastar hydrolic steering.

[nugent]

Mine sold long time ago cash required for another project I enjoy the build more than using it desperate to buy another hull been let down twice now cash awaits if u know of any thing

[J.W.W.]

Originally Posted by benjytaylor

The console Is coming off as we speak. Leaving a fair but of kit on it still. - VHF, garmin fish finder, seastar hydrolic steering.

Going to put on a larger console then I assume?
Good luck removing the kit..

[nugent]

rib tubes/sponsons for pacific 22 rib brand new never been fitted | eBay

tubes here

[nugent]

rib tubes/sponsons for pacific 22 rib brand new never been fitted | eBay

tubes can be moded to suit

[J.W.W.]

Originally Posted by nugent

rib tubes/sponsons for pacific 22 rib brand new never been fitted | eBay

tubes here

Thanks!
Don't know if these fit the Atlantic?
I've sent him a mail..
Rgrds

[benjytaylor]

Yes the boat will be kitted out very similar to ed's ( nugent) so no need for the RNLI console plus I have a 225 Honda efi going on her

[J.W.W.]

Some pictures
Looks quite the same as Nugent's..

[benjytaylor]

Must be something in the air, just done this to mine

[benjytaylor]

[Razorbill RIBs]

What length shaft is that Benjy?

[nugent]

It looks wrong as its on a trolley not fitted to hull,,, I had to look twice,, I used a std long shaft on mine run fine with no cavitation at all

Sent from my iPad using Rib.net

[benjytaylor]

Yes it's on an engine stand and it's a long shaft engine I actually hoisted it up to check

[nugent]

single lump on that shaped hull looks impressive when on the plane