Atlantic 21 Project

[nugent]

Originally Posted by Chris

Im sure you have done this anyway Edd... Dont forget to drill some holes in the bottom of the cable ducting to avoid any water building up...

that must be the 5 x 20mm holes i used the tank cutter for

[nugent]

this supprised me trailer hull + fuel cells =

light me finks

[oracle]

That does look light. Be interesting to see how it grows with console, seats, A frame? etc.

[nugent]

more fun in the shed

i really did not want to cut this up but had no option the fuel pick up pipe was not in the right end of the tank to have them situated where they are now

[nugent]

back to more fun type things

lots of marine ply chuffin not cheap

cut cut measure n cut

[nugent]

sort out cable trunking
align various bits n bobs n cut holes where required
anchor locker not the hatch being used just pondering things

[nugent]

best get these positioned right before laminating in

2 x doubles
2 x singles

and a smallish console

[nugent]

seal & laminate underneath of ply

chuffing running out of steam about here

fumes where fun tho

time to trim me finks

[nugent]

shower n beer next on the cards kin fooked i is

roll on tomoz


some randon snaps to finish

[nugent]

weird old day work my fingers to the bone and i feel as if i got no where

drilled shed loadsa holes
c/sunk said holes
clearance holed the ply wood drilled and tapped the hull how many f ing holes


deck is bonded glassed and screwed i never intend to go in there again

finally glassed in tanks

decided to flo coat parts of internal hull that will be seen through various hatches

and lastly glassed the deck in,, never want to see another paddle roller again hands are dun in,,,

[nugent]

couple of ply wood bits/flanges to make for trunking and tanks

tomoz i will get the pods and console in for good,,

then i have another 200 or so holes to drill and tap for the tube fitting rails chuff me not looking forward to that trust me

[nugent]

chuff me i ha e buit a time machine its 2003!!!!!!!!!!!!!!!!!!!!

poxy camera

[shoestring]

Excellent Build thread can't believe how well you've bollo@ked on with this given whats involved (not that i'd know ) anyway thanks for the pics & keep em coming! AL

[kerny]

Superb can't wait for the end result

[nugent]

Originally Posted by kerny

Superb can't wait for the end result

Funny that wife says the same. She is sick of me working on it
They just do not understand,, could understand it if I spent the day in the pub googling some bar. Maids fine breasts, not that I would of course,

[nugent]

nice satisfying day feel like its getting there

kin could i get this console of th efloor on my own er nah

all glassed in

setting trailer up properly

overall combined weight still light me finks

[nugent]

weight

small a frame

flo coating

[nugent]

time to get cleaned up and be nice to the wife or she will not let me play again tommorow

bless her



i managed to get the rails of the tubes to day chuff me easy not

tomoz try on tubes anti slip then 4 days away from her

[nugent]

jeezusssssssssss
thank god the easter break is over,, back to work in the morning be glad of the break

another very early start really anoying the wife


anti slip time

lots of masking

cleaning under neath of tubes

rotten fixing rails seriously bad these was

[nugent]

another coat of anti slip still got to tidy up around console and seat bases but getting there

i did weigh the tubes but you can not see scales on pic 0.13t

lifting said tubes to ward the rib

Oh i was excited big stylie about this time