|
|
12 November 2013, 16:42
|
#101
|
Member
Country: UK - Wales
Town: N Wales Chester
Boat name: Mr Smith
Make: Humber
Length: 6m +
Join Date: Feb 2009
Posts: 5,238
|
Black imprint toobs and orange VERY nice! More pics!!!
__________________
|
|
|
12 November 2013, 17:23
|
#102
|
Member
Country: UK - England
Town: Bucks
Boat name: Blue & Ding Dong
Make: Ribeye,SR4 & Bombard
Length: 6m +
Engine: 115,50 & 15Hp Yams
Join Date: Feb 2004
Posts: 3,252
|
Quote:
Originally Posted by Chris Caton
well, what can I say, can't thank Mike Whitham of Whitham Glassfibre enough for the job he has done supplying and fitting the console / jockey seats and anchor locker, Mike also sorted the hull out for me and has made a really good job of it, can't recommend him enough if you are looking for someone to refurb your hull for you, he's a star
the tubes were made at SIT Ltd, another great place, again I can't thank them enough for their efforts, especially Chris Chadwick for sorting it for me, again can't recommend them enough for either tube repairs or just complete replacements
I'll post a few pics, but here's a little taster so you get the idea
|
Chris now you are just taking the p**s we need more photos!!!!
This is going to look so cool, just need to get that Aframe on
This has been too long I can’t remember that engine you have for it?
__________________
Member of the Ribeye supporters club!!!
Member of Bombard 380 Aerotec club
Member of SR4 club
|
|
|
12 November 2013, 17:26
|
#103
|
Member
Country: UK - England
Town: Wirral & Caernarfon
Boat name: That's Enuff
Make: Revenger & Avon SR4
Length: 7m +
Engine: Honda 150HP & 50HP
Join Date: Jul 2011
Posts: 4,421
|
just for you HP
__________________
|
|
|
12 November 2013, 17:32
|
#104
|
Member
Country: UK - England
Town: yeovil
Boat name: Lilly of lyme
Make: XS
Length: 4m +
Engine: 30hp Yamaha
Join Date: Jul 2011
Posts: 631
|
nice!
__________________
|
|
|
12 November 2013, 17:32
|
#105
|
Member
Country: UK - England
Town: Wirral & Caernarfon
Boat name: That's Enuff
Make: Revenger & Avon SR4
Length: 7m +
Engine: Honda 150HP & 50HP
Join Date: Jul 2011
Posts: 4,421
|
Quote:
Originally Posted by Nick Hearne
Chris now you are just taking the p**s we need more photos!!!!
This is going to look so cool, just need to get that Aframe on
This has been too long I can’t remember that engine you have for it?
|
give me a chance Nick, I'm doing me best, honest
I'm ringing tomorrow to see if they can fit me in to do the A frame etc
yes, I've sorted an engine, after a lot of phone calls and a few disappointments I tracked down a Honda 50, which has been a nightmare to sort out but nearly there now
another pic
__________________
|
|
|
12 November 2013, 17:35
|
#106
|
Member
Country: UK - England
Town: Ashton-under-Lyne Lancs
Boat name: IMOGEN
Make: Air-Craft 5.4
Length: 5m +
Engine: Suzuki df70a
MMSI: 235087492
Join Date: May 2010
Posts: 7,078
|
Looks nice with them new tubes Chris
__________________
Member of S.A.B.S. (Lancashire Division)
|
|
|
12 November 2013, 17:39
|
#107
|
Member
Country: UK - England
Town: Wirral & Caernarfon
Boat name: That's Enuff
Make: Revenger & Avon SR4
Length: 7m +
Engine: Honda 150HP & 50HP
Join Date: Jul 2011
Posts: 4,421
|
Quote:
Originally Posted by kerny
Looks nice with them new tubes Chris
|
I thought you would like them Steve
__________________
|
|
|
12 November 2013, 20:19
|
#108
|
Member
Country: France
Town: Huisnes sur Mer
Boat name: Raufoss
Make: Avon
Length: 4m +
Engine: Mercury 50
Join Date: Sep 2010
Posts: 789
|
Looks awesome Chris, great combo the black and orange, really like it. :-)
I would have loved a bow locker but my console is fitted so far forward that it would have been impractical which begs the question of where I'm gonna keep the anchor?
What are you going to with the flooding hull, blank it or leave it?
I've just fitted a system to mine that gives me the option of either blanking it or flooding it dependent on what I'm gonna. Be doing....
Removable Blanking bungs at the pointy end and an unscrewable heavy duty cap at the rear.
Simon
Sent from my Experia Ultra europallet using Rib.net
__________________
C'est pas l'homme qui prend la mer, c'est la mer qui prend l'homme....
|
|
|
12 November 2013, 20:30
|
#109
|
Member
Country: UK - Wales
Town: N Wales Chester
Boat name: Mr Smith
Make: Humber
Length: 6m +
Join Date: Feb 2009
Posts: 5,238
|
That is lovely Chris. What a great job. Reckon Mr Smith will look a little smarter too after an Xmas pampering. Will need to get ready for the flash of boats in April!
__________________
|
|
|
12 November 2013, 20:58
|
#110
|
Member
Country: UK - England
Town: Royal Wootton Bassett
Length: 8m +
Engine: 250
Join Date: Jul 2008
Posts: 8,047
|
Nice one Chris, that looks awesome
__________________
|
|
|
12 November 2013, 21:07
|
#111
|
Member
Country: Ireland
Town: Galway
Boat name: Top Banana
Make: Scorpion 9m
Length: 9m +
Engine: Yamaha 421STI
MMSI: Yeah right!
Join Date: Jul 2013
Posts: 1,164
|
Looks fabulous Chris. Can't wait to get back home next week and crack on with mine now.
I'll give you a shout next week and pop over to the Wirral, buy you a beer and collect the hydraulic steering if that suits?
Looking forward to getting on the water with you and Colcreate too...talking of which, what's the collective noun for a group of SR's?
......keep it clean lads
__________________
|
|
|
12 November 2013, 21:40
|
#112
|
Member
Country: UK - England
Town: Dorset & Hants
Boat name: Streaker/Orange
Make: Avon/Ribcraft
Length: 4m +
Engine: 50Yam/25 Mariner
Join Date: Apr 2007
Posts: 5,551
|
I have serious sr4 envy. These two sr projects are going to make two seriously good fun boats!
Black tubes are the way forward, with a truck, cradle, bow locker, etc etc :-)
__________________
|
|
|
12 November 2013, 21:45
|
#113
|
Member
Country: UK - England
Town: Wirral & Caernarfon
Boat name: That's Enuff
Make: Revenger & Avon SR4
Length: 7m +
Engine: Honda 150HP & 50HP
Join Date: Jul 2011
Posts: 4,421
|
Quote:
Originally Posted by Anchorhandler
Looks awesome Chris, great combo the black and orange, really like it. :-)
I would have loved a bow locker but my console is fitted so far forward that it would have been impractical which begs the question of where I'm gonna keep the anchor?
What are you going to with the flooding hull, blank it or leave it?
I've just fitted a system to mine that gives me the option of either blanking it or flooding it dependent on what I'm gonna. Be doing....
Removable Blanking bungs at the pointy end and an unscrewable heavy duty cap at the rear.
Simon
Sent from my Experia Ultra europallet using Rib.net
|
hi Simon,
thanks, only saw a photo of it y'day, made up to see it in the flesh today up to now I'm leaving it as a flooding hull, see how it goes, but may change my mind, yours looks like a good compromise
__________________
|
|
|
12 November 2013, 21:50
|
#114
|
Member
Country: UK - England
Town: Wirral & Caernarfon
Boat name: That's Enuff
Make: Revenger & Avon SR4
Length: 7m +
Engine: Honda 150HP & 50HP
Join Date: Jul 2011
Posts: 4,421
|
Quote:
Originally Posted by whisper
Nice one Chris, that looks awesome
|
thanks Alex, I'm made up with how it's turned out so far, stainless next hopefully
Quote:
Originally Posted by Barrowboy
Looks fabulous Chris. Can't wait to get back home next week and crack on with mine now.
I'll give you a shout next week and pop over to the Wirral, buy you a beer and collect the hydraulic steering if that suits?
Looking forward to getting on the water with you and Colcreate too...talking of which, what's the collective noun for a group of SR's?
......keep it clean lads
|
sounds good to me, give me a call when your back
Quote:
Originally Posted by PeterM
I have serious sr4 envy. These two sr projects are going to make two seriously good fun boats!
Black tubes are the way forward, with a truck, cradle, bow locker, etc etc :-)
|
a truck n cradle sounds the business, I'm regretting letting my HGV licence go last year now, but was other wise engaged at the time do like the black tubes though
__________________
|
|
|
12 November 2013, 22:13
|
#115
|
Member
Country: UK - England
Town: Wirral & Caernarfon
Boat name: That's Enuff
Make: Revenger & Avon SR4
Length: 7m +
Engine: Honda 150HP & 50HP
Join Date: Jul 2011
Posts: 4,421
|
Quote:
Originally Posted by xs 400
nice!
|
thanks took a while to decide but glad we went got the black tubes, I'll try to get some better pics tomorrow
__________________
|
|
|
13 November 2013, 18:18
|
#116
|
Member
Country: UK - England
Town: Wirral & Caernarfon
Boat name: That's Enuff
Make: Revenger & Avon SR4
Length: 7m +
Engine: Honda 150HP & 50HP
Join Date: Jul 2011
Posts: 4,421
|
the original plywood off the transom is too far gone to re-use, so what's the best option to go with considering marks on the transom, a new piece of marine ply, a stainless plate, or just bolt the Honda 50 straight onto the transom, looking for ideas?
__________________
|
|
|
13 November 2013, 19:32
|
#117
|
Member
Country: France
Town: Huisnes sur Mer
Boat name: Raufoss
Make: Avon
Length: 4m +
Engine: Mercury 50
Join Date: Sep 2010
Posts: 789
|
Quote:
Originally Posted by Chris Caton
the original plywood off the transom is too far gone to re-use, so what's the best option to go with considering marks on the transom, a new piece of marine ply, a stainless plate, or just bolt the Honda 50 straight onto the transom, looking for ideas?
|
Hi Chris
I would always prefer stainless to anything else.
There was no issue with my transom but in the pictures I posted the other day showing my drain hole (for lack of a better expression), you can see the 316 4mm thick plate I fitted as a doubler.
I only had some 2mm in stock in the workshop so had to order it in. ironically it came from EBay UK andros me £40 for a 400x400mm sheet.
I then cut it to take the shape of the transom, sikaflexed the back of it and bolted the outboard through it to the transom.
.;-)
Simon
Sent from my Experia Ultra europallet using Rib.net
__________________
C'est pas l'homme qui prend la mer, c'est la mer qui prend l'homme....
|
|
|
13 November 2013, 19:38
|
#118
|
Member
Country: France
Town: Huisnes sur Mer
Boat name: Raufoss
Make: Avon
Length: 4m +
Engine: Mercury 50
Join Date: Sep 2010
Posts: 789
|
Btw Chris, do you have any kind of makers plate on your transom?
I ask as I only have the HID tag on my transom but would prefer a proper makers plate showing Avon as the builder and max transom loading etc...
Can you still get them? has anyone ever had any made-up?
Simon
Sent from my Experia Ultra europallet using Rib.net
__________________
C'est pas l'homme qui prend la mer, c'est la mer qui prend l'homme....
|
|
|
13 November 2013, 20:18
|
#119
|
Member
Country: UK - England
Boat name: Carpe Diem
Make: Ribeye 650S
Length: 5m +
Engine: Yamaha F150
Join Date: Oct 2012
Posts: 548
|
Chris, boat looks really good by the way!
The tubes - Are they a matt finish or a fabric/textured impression?
G
__________________
|
|
|
13 November 2013, 21:14
|
#120
|
Member
Country: UK - England
Town: Wirral & Caernarfon
Boat name: That's Enuff
Make: Revenger & Avon SR4
Length: 7m +
Engine: Honda 150HP & 50HP
Join Date: Jul 2011
Posts: 4,421
|
Quote:
Originally Posted by Anchorhandler
Hi Chris
I would always prefer stainless to anything else.
There was no issue with my transom but in the pictures I posted the other day showing my drain hole (for lack of a better expression), you can see the 316 4mm thick plate I fitted as a doubler.
I only had some 2mm in stock in the workshop so had to order it in. ironically it came from EBay UK andros me £40 for a 400x400mm sheet.
I then cut it to take the shape of the transom, sikaflexed the back of it and bolted the outboard through it to the transom.
.;-)
Simon
Sent from my Experia Ultra europallet using Rib.net
|
Quote:
Originally Posted by Anchorhandler
Btw Chris, do you have any kind of makers plate on your transom?
I ask as I only have the HID tag on my transom but would prefer a proper makers plate showing Avon as the builder and max transom loading etc...
Can you still get them? has anyone ever had any made-up?
Simon
Sent from my Experia Ultra europallet using Rib.net
|
thanks Simon, I must admit if I could have saved the original marine ply I would have gone that route, if for no other reason than to keep a little bit of the original rib, but as it's beyond saving then stainless is my preferred choice, see what they suggest when I take it in to get the A frame made next week.
yes, I've still got the original makers plate, I can take a couple of pics and post them so you can see what it looks like, can't say I've seen them advertised but I'll have another look for you
Quote:
Originally Posted by whackywoody
Chris, boat looks really good by the way!
The tubes - Are they a matt finish or a fabric/textured impression?
G
|
thanks Gareth, it looks better than I could have hoped for, the tubes are a matt / textured finish and look really good, made up with the finish so far
__________________
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|