Bimini mounting hardware?

[SurfnRide]

So I am trying to get a 4 bow 8 ft Bimini mounted. There is already previous hoop rings up front from someone else who had a previous Bimini so good to go there.

In the middle there is already sliders on the rope rail thing on top of the tubes (see pic).

I'm trying to find a mount that would go on the rope rail thing also to hold the back support lines of the Bimini.

I'm describing this soooo bad. Take a look at the pics and arrows and let me know if you have questions or know where I can find that mount.

[SurfnRide]

What is this rope thing attachment called? I can probably figure out the mounting hardware if I knew the name for this part.

[jeffstevens763@g]

Hogging rail bud

[SurfnRide]

Thank you!

Originally Posted by jeffstevens763@g

Hogging rail bud

[pagick]

Here is how I did mine. I used Plastic lumber scraps from patio railing. Also I had to make a shim to go under the mounting hardware to level out the mounting surface. Sorry my photos turn when I post here.

[jeffstevens763@g]

pagick
i did the same with my console but i used HDPE. re the photos i do it all the time having my phone up right if you turn it horizontal it sorts it, assuming you are using your phone

[SurfnRide]

Boom there it is. That's exactly what I need to do. Thanks for the idea

Originally Posted by pagick

Here is how I did mine. I used Plastic lumber scraps from patio railing. Also I had to make a shim to go under the mounting hardware to level out the mounting surface. Sorry my photos turn when I post here.