Can anyone identify who makes this hatch?

Nos4r2 · 06 June 2012, 23:11

Any idea who made this hatch? I need 3 from them as they seem to be slightly larger screw spacings than the normal screw closure hatches. I don't recognise the maker's mark.

TonyC · 07 June 2012, 00:20

Looks like this one:

http://www.rib-shop.com/product.asp?...hFor=&PT_ID=35

Nos4r2 · 07 June 2012, 02:14

Quote:

Originally Posted by TonyC

Looks like this one:

http://www.rib-shop.com/product.asp?...hFor=&PT_ID=35

Cheers! I'll be ringing Ribshop in the morning then.

I actually need a different size to the one in the pic as well, and I can't find out the name of the manufacturer. It's a bit item specific as the one covering my fuel sender is a slightly larger cutout than any other hatch near that size.

Nos4r2 · 07 June 2012, 10:23

No joy-Ribshop say it's a standard picture and they sell Barton hatches. It's not a Barton.

Anyone got any ideas?

Nos4r2 · 07 June 2012, 19:39

Anyone at all?

just another toy · 07 June 2012, 22:35

have you tried polymarine? i think they might stock some hatches

Nos4r2 · 07 June 2012, 22:39

Quote:

Originally Posted by just another toy

have you tried polymarine? i think they might stock some hatches

Yes-it's not one they stock either.

Thanks though

basically for others reading this, as the screws on these hatches are slightly more spaced out than on Barton hatches, the holes in the boat are slightly bigger too, so if I try and use a Barton hatch the screws just drop into fresh air.

Mollers · 07 June 2012, 22:48

Quote:

Originally Posted by Nos4r2

..... the screws just drop into fresh air.

Have you tried Ribcraft?

just another toy · 07 June 2012, 22:49

What size is the hatch?

Nos4r2 · 07 June 2012, 23:01

Quote:

Originally Posted by Mollers

Have you tried Ribcraft?

Quote:

Originally Posted by just another toy

What size is the hatch?

It's not just that one hatch that's the issue-there's 3-a 6 inch and 2x10 inch hatches on the Ballistic, all with the same logo and all fitted in South Africa.

When I asked JBT marine they didn't know who makes them and they import the Ballistics.

I've managed to find a contact at Ballistic in SA, so hopefully I'll be able to get some but it's a real ballache having to order and ship from that far away so finding out whose logo that is could make life a whole load easier.

gohelm · 08 June 2012, 22:39

Do you have a picture of the (deck)ring it goes in to?

Nos4r2 · 08 June 2012, 22:46

Quote:

Originally Posted by gohelm

Do you have a picture of the (deck)ring it goes in to?

Yes-these 2 hatches.

Both with the same logo.

Ballistic in SA can supply them, but the shipping is crippling (nearly £100) and they won't tell me who makes them...

Ian M · 08 June 2012, 22:50

Quote:

Originally Posted by Nos4r2

Ballistic in SA can supply them, but the shipping is crippling (nearly £100) and they won't tell me who makes them...

Take them out and replace the hatch and deck ring with ones of similar diameter that you can source in the UK?

Nos4r2 · 08 June 2012, 22:56

Quote:

Originally Posted by Ian M

Take them out and fit ones of similar diameter that you can source in the UK?

That's the issue-the hole in the deck is cut for the hatch that's in there and is fitted at the factory in SA. The screw holes in the current hatch are about 1/2" further apart than any generic similar size ones available in the UK so there's nothing under the screw holes to fix the screws into.

I did consider taking it out to an 8" hole, but the generic 8" hatches aren't anywhere near as beefy as this one.

Nos4r2 · 11 June 2012, 17:59

Bump-just got the quote to get some over from South Africa and it's going to be £183 for 2x3" hatches and 2x6" hatches so if ANYONE recognises it?

Pikey Dave · 11 June 2012, 18:18

Sorry, can't help with id-ing yours, but if you want a bullet proof hatch, try Bailey Marine I've got one in my deck for access to the sounder transducer & you could literally drive a bus over it. Not cheap, but might compare with buying yours from SA

Nos4r2 · 11 June 2012, 22:25

Quote:

Originally Posted by Pikey Dave

Sorry, can't help with id-ing yours, but if you want a bullet proof hatch, try Bailey Marine I've got one in my deck for access to the sounder transducer & you could literally drive a bus over it. Not cheap, but might compare with buying yours from SA

Is it the 4" hatch you've got there? If it is, can you measure the distance between 2 opposite screw hole centres for me please?

Pikey Dave · 11 June 2012, 22:28

Quote:

Originally Posted by Nos4r2

Is it the 4" hatch you've got there? If it is, can you measure the distance between 2 opposite screw hole centres for me please?

Sorry Nos, mines an 8 incher

Pete7 · 12 June 2012, 16:17

Quote:

Originally Posted by Nos4r2

That's the issue-the hole in the deck is cut for the hatch that's in there and is fitted at the factory in SA.

Should 'ave kept the Avon mate

Pete7 · 12 June 2012, 16:38

Cut them out and replace them with something you can get your hands on.

Most of the plastic hatches are supplied by C-Quip btw.

Anyway try some of these, bit more upmarket than the Henderson hatches.

Force 4 10" Round Inspection Hatch- Dia: 334mm- Cutout:265mm- Opening:240mm - Only £24.95 - Force 4 Chandlery

Pete