Eurocraft

[Milan]

http://www.eurocraft.com/

Has anyone on this forum had work carried out by Eurocraft they are currently doing some work on my boat and come very highly recommended?
When I took the boat to them they could not have been more helpful bearing in mind they are only carrying out in terms of what they do a very small amount of work on the boat they still took the time to talk to me to find out exactly what I wanted a service that’s sadly lacking these days if anyone’s interested I will keep them posted on how the work turns out but if anyone has experience of this company I would appreciate there comments.

[DM]

Eurocraft are excellent. In the dealings I've had with them, they go the extra mile to make sure you're satisfied.

Chris even came in and opened the factory up last Sunday to fit in with my schedule. Top man.

DM

[Milan]

Originally Posted by davidmanning

Eurocraft are excellent. In the dealings I've had with them, they go the extra mile to make sure you're satisfied.

Chris even came in and opened the factory up last Sunday to fit in with my schedule. Top man.

DM

Thank you for that davidmanning seems to be the same experiance I have encounterd so far very reassuring

[Ribster Rache]

Milan, Eurocraft tubed our present rib, and the one before that and we have been very pleased with their work. Give our regards to Dave and Chris when you next see them.

[jwalker]

Maybe stul will add his experience to this thread in the course of time.

[Milan]

Originally Posted by Ribster Rache

Milan, Eurocraft tubed our present rib, and the one before that and we have been very pleased with their work. Give our regards to Dave and Chris when you next see them.

No problem Rache will do

[Milan]

Originally Posted by jwalker

Maybe stul will add his experience to this thread in the course of time.

Is there something you know jwalker you can always pm. me

[stul]

Hi
Had lots of work done by euocrat since about sept 05 ,I have 4 metre Narwhal with leaky Tubes,without going into a lot of detail .They try hard to please.please contact me for more detail
Stul

[bedajim]

Hi

I had Eurocraft retube my searider

Sent it up to them and had it collected 6 weeks later
it looked great except for the bow which was twisted to one side

They offered to collect it but I took it back as it fitted in with visiting customers and I wanted to see their setup

collected it 10 days later with a patch on the bow as agreed to make it look right to the eye and it = double thickness bow

used it a couple of times and the patch started to lift and bubble

Called Dave and they offered two options
I could keep it until the end of the season so that I could use it and they would then sort it or they would collect it and sort it asap
I chose the later and they collected it removed the tubes replaced the bow sections and returned it in about 3 weeks
looking great(must of been about 500 miles of towing for them)

so it took a while but we got there and they provided the support backup that you would expect and yes I would use them again

James

[Milan]

Originally Posted by bedajim

Hi

I had Eurocraft retube my searider

Sent it up to them and had it collected 6 weeks later
it looked great except for the bow which was twisted to one side

They offered to collect it but I took it back as it fitted in with visiting customers and I wanted to see their setup

collected it 10 days later with a patch on the bow as agreed to make it look right to the eye and it = double thickness bow

used it a couple of times and the patch started to lift and bubble

Called Dave and they offered two options
I could keep it until the end of the season so that I could use it and they would then sort it or they would collect it and sort it asap
I chose the later and they collected it removed the tubes replaced the bow sections and returned it in about 3 weeks
looking great(must of been about 500 miles of towing for them)

so it took a while but we got there and they provided the support backup that you would expect and yes I would use them again

James

Sounds like good news James judging by the response so far it seems there a company that will go the extra mile to help a customer just about to pm. Stul
I think he may have a differant opinion.

[Stormchild]

I understand yy ribquest LR 5.8 had its tubes made and fitted by Eurocraft. Check with ribquest, but I understand eurocraft fit tubes to all Ribquest boats. Mine have been no problem.

[Milan]

All I can say is fantastic company first class service very helpful and would recommend them to anyone