Hi all any one know how to tighten tubes on this model they seem to be abit loose.Just finished cleaning one side i bought it in a right state.Just put some before and after shots what do you think.
Thanks Nasher my back is in bits!As for the tubes the back end is about 2 inchs away from hull pumped tube up abit more and it helped a little but if you pull outwards on tubes there is a gap again not sure if thats normal.
Use to own one once
The tubes will pull away from rear seat until inflated hard
Thay are fitted to the hull by a roap wich slides in grove from bow to stern
hope this helps