Humber build quality

nugent · 06 May 2014, 19:07

Just ripped console out of an ocean pro fairly new too,, been stood a while but feck me,,,

The floors spongy as feck,,, drilled 100mm hole well tried my best kept holding the bit as its so wet,, nothing under Neath the ply at all, no primer no glass just bare wood,

Well shocked to be fare,, and who ever rigged it wants shooting big time,,,
Huge kinks in hydro pipes, control cables are 2.5 mtrs longer than required. Totally shocking. The whole thing,,,,
Undone screws on seating and it simply lifted off,,, cheapo silicon for sure,, last one I did took me for ever to separate console from the deck,,,

Chris · 06 May 2014, 19:10

Quote:

Originally Posted by nugent

Just ripped console out of an ocean pro fairly new too,, been stood a while but feck me,,,

The floors spongy as feck,,, drilled 100mm hole well tried my best kept holding the bit as its so wet,, nothing under Neath the ply at all, no primer no glass just bare wood,

Well shocked to be fare,, and who ever rigged it wants shooting big time,,,
Huge kinks in hydro pipes, control cables are 2.5 mtrs longer than required. Totally shocking. The whole thing,,,,
Undone screws on seating and it simply lifted off,,, cheapo silicon for sure,, last one I did took me for ever to separate console from the deck,,,

I thought you were supposed to be putting your feet up

Nos4r2 · 06 May 2014, 19:10

Ouch! Could it be a home completion? What year is it?

Festinghouse · 06 May 2014, 19:26

Quote:

Originally Posted by Chris

I thought you were supposed to be putting your feet up

that was going to be my comment!

matt h · 06 May 2014, 19:38

Quote:

Originally Posted by Nos4r2

Ouch! Could it be a home completion? What year is it?

Quote:

nothing under Neath the ply at all, no primer no glass just bare wood,

Nothing to do with home completion Nos. that's how they are as I found out, I could not believe the consol's were screwed down with self tappers and as I found out. clear Silicone sealer. Check out the quality in this little gem.

Nugent. if anyone can make it good you the man!!

colcreate · 06 May 2014, 19:49

Quote:

Originally Posted by Chris

I thought you were supposed to be putting your feet up

Quote:

Originally Posted by Festinghouse

that was going to be my comment!

You just can't keep a good man down!

matt h · 06 May 2014, 19:52

He Loves it. and he is bloody good at it as well. anyway hows the SR going?

colcreate · 06 May 2014, 20:09

Quote:

Originally Posted by matt h

He Loves it. and he is bloody good at it as well. anyway hows the SR going?

+1
My SR? It's awesome! e-tec outperforms the hull..... or me!

Hey Nugent, if you get wind of a 6mt that needs a bit of TLC (and would look good with twin e-tec 90's) give me a shout, you can't have them all to yourself!

nugent · 06 May 2014, 20:13

Sorry guys I had a scare, shook me up lots, and I was on brink of a huge career change , pressure fecked me up, also an up coming Opp was causing me big issues mentally more than any thing else,,,, but I is here and feeling pretty good to be fare,

Back to norm. Was scaring my self as you do,,,,,,,
My pac 22 is on route to henshaws sat am for completion,, and decided to stay put in my job,, after all only got 4 yrs left in my original plan,,, 55 is my chill out date,,,,

Thanks for various offers of help, all well duly noted ,,,,,,

nugent · 06 May 2014, 20:20

Quote:

Originally Posted by Nos4r2

Ouch! Could it be a home completion? What year is it?

Done les than 20hrs according to laptop,,, even engine is fitted central and way to low , got o be home completion job,,,,,but hulls a joke pure bad practice,I primer and laminate both sides of my floors,,,

This old humber I did last year was cut and tank sunk into deck,,it was bone dry and laminated under the deck no rot any place

So to me that is penny pinching 12 yrs on there not sealing the ply, but they cost more lots feckin more

mick · 06 May 2014, 20:20

Reckon you could make a good career out of refurbs

nugent · 06 May 2014, 20:23

Quote:

Originally Posted by colcreate

+1
My SR? It's awesome! e-tec outperforms the hull..... or me!

Hey Nugent, if you get wind of a 6mt that needs a bit of TLC (and would look good with twin e-tec 90's) give me a shout, you can't have them all to yourself!

Know of a 6 mtr destroyer hull old no tubes or trailer
£650.00

nugent · 06 May 2014, 20:24

Quote:

Originally Posted by mick

Reckon you could make a good career out of refurbs

Can not grumble,,,,keeps her indoors in wine. Lol

Festinghouse · 06 May 2014, 20:29

Quote:

Originally Posted by colcreate

+1
My SR? It's awesome! e-tec outperforms the hull..... or me!

Hey Nugent, if you get wind of a 6mt that needs a bit of TLC (and would look good with twin e-tec 90's) give me a shout, you can't have them all to yourself!

bloody hell col' ive not seen you out with the new engine yet! get some mileage on it before looking at having 2 of the things!

colcreate · 06 May 2014, 21:01

Quote:

Originally Posted by Festinghouse

bloody hell col' ive not seen you out with the new engine yet! get some mileage on it before looking at having 2 of the things!

Well when you wasn't looking I took a week off and explored the limits (scared my self silly) and put some hours on the engine.
It was like that memorable line from Jaws, 'We're gonna need a bigger boat'

The SR5.4's are great but I have come down from a 6.2m and there just doesn't seem to be 'any substitute for cubes' (cubic inches). anyway this is Nugents thread.....

Chris Caton · 06 May 2014, 21:36

glad to hear you're feeling better Edd, take it steady on this one, sounds like it's fit for the scrap heap but no doubt you'll have it sorted soon enough

MustRib · 06 May 2014, 21:45

Quote:

Originally Posted by matt h

Nothing to do with home completion Nos. that's how they are as I found out, I could not believe the consol's were screwed down with self tappers and as I found out. clear Silicone sealer. Check out the quality in this little gem.

Nugent. if anyone can make it good you the man!!

Bit disappointing to read this about Humber.
They retubed Merlin a few years ago. Tubes still look great
and no issues.

Pikey Dave · 06 May 2014, 21:47

Quote:

Originally Posted by colcreate

Well when you wasn't looking I took a week off and explored the limits (scared my self silly) and put some hours on the engine.
It was like that memorable line from Jaws, 'We're gonna need a bigger boat'

The SR5.4's are great but I have come down from a 6.2m and there just doesn't seem to be 'any substitute for cubes' (cubic inches). anyway this is Nugents thread.....

Anything on the right side of 6m needs a pair of 115s, not 90s

& if you're putting 115's on, you might as well go the whole hog & put 130s on it

Festinghouse · 06 May 2014, 22:05

bigger is always better, unless its a boil in the crack of your arse!

HUMBER P4VWL · 06 May 2014, 23:24

So how can you find out if the under deck of a rib is laminated or not "without" drilling the thing!

Plus, if it isn't laminated is there any recourse to them?

Hi res Anglesey pics

Alex Whittaker / Shedpix Donations for Round Anglesey Macmillan 2014 https://www.justgiving.com/Rib-net