Humber Tube Pressure

JTURNER · 19 July 2018, 21:04

Hi All, does anyone know the correct Tube Pressure for a Humber Ocean Pro 800. It is made with 1300 Hypalon. Boat did not come with the usual manuals so I have no reference and can find little on the Humber website. The tubes have pressure release valves, but I still want to try and avoid over filling if I can. Thanks Jonathan

Xk59D · 19 July 2018, 21:55

It should be on the ID plate on the transom.

It is probably in the 2-2.5 psi region.

glue jug · 20 July 2018, 17:40

Probably fitted with these - Leafield A6 Pressure Relief 3.25psi

JTURNER · 22 July 2018, 21:45

Quote:

Originally Posted by Xk59D

It should be on the ID plate on the transom.

It is probably in the 2-2.5 psi region.

It looks to be 2psi which is lower that I was expecting. at 2psi the pressure release valves kick in. Thanks for all the input above

Cheers

Jonathan

Bent Pedersen · 23 July 2018, 16:39

I always fill the tube until the relief valve telling me is enough. That is their job.