16 August 2011, 18:14
#41
Member
Country: UK - England
Town: Kings Lynn
Boat name: Blow 'N' Away
Make: Coastline
Length: 7m +
Engine: Suzuki 175
Join Date: Jun 2009
Posts: 503
Quote:
Originally Posted by
1978SeaRider
After looking for a new RIB for a month or two... a chap on my site has decided to let his go....
Attachment 61699
2005 craft with 2005 engine. The engine is a 250hp and has less than 200 hours on, full service history and has been maintained religiously... its a 7.5m.. a rear bench seat can be fitted in the stern...
What do you think ? Any idea's on price ?
http://www.rib.net/forum/f21/osprey-...ine-43116.html
__________________
16 August 2011, 18:22
#42
RIBnet supporter
Country: UK - England
Town: Dinard, Brittany
Boat name: Into the Red
Make: Osprey Vipermax
Length: 7m +
Engine: Evinrude E-tec 250HO
MMSI: 235 076 114
Join Date: Apr 2009
Posts: 1,957
Quote:
Originally Posted by
HUMBER P4VWL
Though I'd agree re 2 v 4 strokes, the suz 4 is amazingly quiet
VIDEO " type="application/x-shockwave-flash" wmode="transparent" width="425" height="350">
Dirty, smelly things
16 August 2011, 18:35
#43
Member
Country: UK - Wales
Town: Anglesey
Boat name: Trixie
Make: Scorpion 8.5m
Length: 8m +
Engine: 300hp Suzuki
Join Date: Sep 2006
Posts: 283
Quote:
Originally Posted by
Paul Cannell
Cheers... But I went to see this.... They couldn't be more different believe me
__________________
17 August 2011, 01:13
#44
Member
Country: UK - Wales
Town: West Wales
Make: Vipermax 5.8, SR4.7
Length: 5m +
Engine: 150 Opti, F50EFi
Join Date: Sep 2005
Posts: 6,299
Quote:
Originally Posted by
HUMBER P4VWL
I'd hazard a guess at a new 7.5m hull and tubes being 25k
__________________
17 August 2011, 08:14
#45
Member
Country: UK - Wales
Town: N Wales Chester
Boat name: Mr Smith
Make: Humber
Length: 6m +
Join Date: Feb 2009
Posts: 5,238
Quote:
Originally Posted by
Downhilldai
Only a guess. A Humber op 7.5m on their site is 23k
__________________
17 August 2011, 10:28
#46
RIBnet supporter
Country: UK - England
Town: Dinard, Brittany
Boat name: Into the Red
Make: Osprey Vipermax
Length: 7m +
Engine: Evinrude E-tec 250HO
MMSI: 235 076 114
Join Date: Apr 2009
Posts: 1,957
Quote:
Originally Posted by
Downhilldai
Quote:
Originally Posted by
HUMBER P4VWL
Only a guess. A Humber op 7.5m on their site is 23k
A bare hull with tubes is around 6k fully fitted out inc engine would definitely begin to look like the figure HP is quoting. Theoretically our engine is worth 22k, I'm certainly not suggesting that Roy paid RRP for it or that infact anyone would just that if you are buying a fully fitted hull from Osprey as the Humber would be then that would undoubtedly be a ball park figure.
Of course what with Osprey being a much smaller operation than Humber there are always ways to reduce that figure....
17 August 2011, 11:14
#47
Member
Country: UK - Wales
Town: West Wales
Make: Vipermax 5.8, SR4.7
Length: 5m +
Engine: 150 Opti, F50EFi
Join Date: Sep 2005
Posts: 6,299
Quote:
Originally Posted by
gotchiguy
A bare hull with tubes is around 6k
I believe that HP was referring a bare hull & tubes, in his estimate, possibly including console & seats.
__________________
17 August 2011, 11:28
#48
RIBnet supporter
Country: UK - England
Town: Rutland
Length: no boat
Join Date: May 2006
Posts: 2,500
Quote:
Originally Posted by
gotchiguy
Theoretically our engine is worth 22k, I'm certainly not suggesting that Roy paid RRP for it or that infact anyone would ..
Especially if it's been kicking around all of the boat shows etc for a year +
__________________
17 August 2011, 15:48
#49
Member
Country: UK - Wales
Town: N Wales Chester
Boat name: Mr Smith
Make: Humber
Length: 6m +
Join Date: Feb 2009
Posts: 5,238
Quote:
Originally Posted by
Downhilldai
I believe that HP was referring a bare hull & tubes, in his estimate, possibly including console & seats.
I was. Lifted it from Humber's site as a starting point. Would then need electrics, engine, nav, bilge etc plus trailer.
__________________
17 August 2011, 17:49
#50
RIBnet admin team
Country: UK - Scotland
Boat name: imposter
Make: FunYak
Length: 3m +
Engine: Tohatsu 30HP
MMSI: 235089819
Join Date: Sep 2005
Posts: 11,627
Quote:
Originally Posted by gotchiguy
A bare hull with tubes is around 6k
Is that right? Seems very cheap for 7.8m of boat. The tubes would be more than half that. Presume that has no console seats etc... ...but even then.
__________________
17 August 2011, 17:57
#51
Member
Country: UK - England
Town: Mighty Penryn
Boat name: Little Joe.
Make: Avon Searider
Length: 4m +
Engine: Honda BF50
Join Date: Aug 2005
Posts: 8,872
Quote:
Originally Posted by
Polwart
Is that right? Seems very cheap for 7.8m of boat. The tubes would be more than half that. Presume that has no console seats etc... ...but even then.
Either the boy is on drugs or Roy Bish pulled my pants down.
__________________
17 August 2011, 18:22
#52
RIBnet admin team
Country: UK - Scotland
Boat name: imposter
Make: FunYak
Length: 3m +
Engine: Tohatsu 30HP
MMSI: 235089819
Join Date: Sep 2005
Posts: 11,627
Quote:
Originally Posted by Mollers
Either the boy is on drugs or Roy Bish pulled my pants down.
Than god for that, I was thinking I might have to apply to be a member of the OOA.
__________________
17 August 2011, 21:29
#53
RIBnet supporter
Country: UK - England
Town: Dinard, Brittany
Boat name: Into the Red
Make: Osprey Vipermax
Length: 7m +
Engine: Evinrude E-tec 250HO
MMSI: 235 076 114
Join Date: Apr 2009
Posts: 1,957
Quote:
Originally Posted by
bedajim
Especially if it's been kicking around all of the boat shows etc for a year +
Increases its collector value
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
Recent Discussions