Guess there are many good ways, but i would sand the varnish down, prime with epoxy and finish whit polyurethane paint. International or Hempel are ok brand's
__________________
fun on a boat is inversely proportional to size...sort of anyway
Ment to write epoxy primer(undercoat). Her something i used on a few boats, but guess any brand is as good. Don't get the polybest on your hands, it will stay forever... almost.
DIY DIY detailed instruction can be downloaded on the same page.
I think they add little gold in the paint as its not cheap....
__________________
fun on a boat is inversely proportional to size...sort of anyway
