Remote compatability/Searider Console

Jimbo · 14 March 2005, 17:52

Double edged thread this one.

Having a knackered Jockey Console on my 5.4 searider, I popped down to Babcocks disposals to see what they had, and being extremely short of space I was sold their last 2 Searider consoles for the usual price of one. Now have 2 HUUUGE consoles sitting in my small uni room (Praying hall staff don't choose today to do an inspection!). Both consoles have full electrics and working (fairly heavy duty) steering. One has a perfect seat, the other the seat vinyl is worn. Am thinking of putting the one I don't want up on eBay. Any ideas what a fair price is? It's the standard 3 man console for a Navy type Searider 5.4m. Actual console is in perfect condition. What sort of money should it go for?

Next question, on one console is a Quicksilver remotes and cables combination. Will these work with my Johnson 70hp VRO, or do I need the actual control box and cables? I have seen quicksilver remotes on Mariner and Mercury engines before, but not on Johnsons.

Cheers!

Jimbo · 14 March 2005, 19:24

On the wiring it also has a circular 8 pin connector, at the "engine end" of the remote cables. Presumeably this does the ignition and PTT, is this also generic or does it vary from engine to engine?

Pete7 · 15 March 2005, 09:24

Jimbo, stick an advert on Ribnet, might help someone who is after a console. I asked £60 for my Pacific one and the buyer seemed happy with that.

Lee or Mark at Fairweather marine should be able to answer your query on the control box electrics and may have a second hand Johnson control box. Pepe boat yard Hayling Island also have an ISO container full of engine bits so you might be in luck. If the Quicksilver wont fit again selling it might help someone on here.

Pete

LURCHER · 15 March 2005, 14:56

I got £83.50 for a very tired console with loads of holes in it .On EBAY

Jimbo · 15 March 2005, 15:52

Think that's the plan I'll go for. I'll try and get some johnson remotes (Sent you a pm lurcher), keep the cables on one console, and sell the other console with steering, electrics, remote cables and 2 rather shagged quicksilver remotes on eBay. Anything about about £50 means that my deal from Babcocks was worth it!

Jimbo · 15 March 2005, 17:03

Just had my room inspected by halls supervisers: "What the hell are those things, and what are they doing in your room???"

"Er, mechanical engineering project, need them for my course."

"Oh. Ok then. Remove them after a month."

"Thankyou!"

Oh so gullible...

tcwozere · 15 March 2005, 17:22

Your talent is wasted at Uni Jimbo, you should be in Government..

slimtim · 15 March 2005, 17:29

Quote:

Originally Posted by Jimbo

Just had my room inspected by halls supervisers: "What the hell are those things, and what are they doing in your room???"

"Er, mechanical engineering project, need them for my course."

"Oh. Ok then. Remove them after a month."

"Thankyou!"

Oh so gullible...

haha, I like your style!

Jimbo · 15 March 2005, 17:47

Never mess with the awesome power of the university pro-vice chancellor! Invoke his name or domain, and watch seemingly important people crumble to insignificant beings around you....

Ok, got a little carried away there, but I did get away with having 2 huge consoles in my room!

Rogue Wave · 15 March 2005, 20:51

hav either of the two consoles you are flogging got a decent seat. ?

Jimbo · 15 March 2005, 22:00

Unfortunately not. I have some 4 seats, one where the back has broken off, one which has a huge hole burnt in it, and one that has some very very faded, worn and in patches worn through vinyl on it, and the 4th only has a tiny rip, which I shall be keeping.

The seat was the main cause of my console related desires anyway unfortunately! If you want photos of any of the "dead" 3, I can send them, one should be quite easy to re upholster as the foam is still good, as is the wooden base.

Blackbird · 16 March 2005, 15:32

So is one of the consoles still available ?

Jimbo · 16 March 2005, 17:42

Indeed it is, have sent you a pm...

Jimbo · 23 March 2005, 14:09

Well, have decided that before offering the console on eBay I'd bite the bullet and become a paid up RibNet member, so the console is now for sale in the Bits N Pieces forum.