 |
23 February 2014, 00:18
|
#1
|
|
Member
Country: UK - England
Town: liverpool
Make: tohatsu6.1 one desig
Length: 6m +
Engine: mariner 125hp
Join Date: Jan 2012
Posts: 357
|
rev counter
Are rev counters interchangeable?
Will my tohatsu 3 cylinder 90hp rev counter work on my mariner 4 cylinder125hp?
__________________
|
|
|
|
23 February 2014, 00:35
|
#2
|
|
Member
Country: UK - Scotland
Town: Fort William
Make: Ribcraft 585
Length: 5m +
Engine: Yamaha F115
Join Date: Mar 2012
Posts: 2,919
|
Can you change the pole setting on the rear of the tacho?
__________________
There is a place on this planet for all of Gods creatures.........right next to my tatties and gravy.
|
|
|
|
|
23 February 2014, 11:01
|
#3
|
|
Member
Country: UK - England
Town: liverpool
Make: tohatsu6.1 one desig
Length: 6m +
Engine: mariner 125hp
Join Date: Jan 2012
Posts: 357
|
I know nothing. What am I looking for I will have it in my hand next week so will look.
__________________
|
|
|
|
|
23 February 2014, 13:24
|
#4
|
|
RIBnet admin team
Country: UK - Scotland
Boat name: imposter
Make: FunYak
Length: 3m +
Engine: Tohatsu 30HP
MMSI: 235089819
Join Date: Sep 2005
Posts: 11,627
|
Quote:
Originally Posted by simon23
What am I looking for I will have it in my hand next week so will look.
|
Usually a dial on the back that you can turn with a flat blade screwdriver to set the number of poles.
__________________
|
|
|
|
|
23 February 2014, 17:05
|
#5
|
|
Member
Country: UK - England
Town: Chorley / Holyhead
Boat name: Northwind Challenger
Make: Tornado
Length: 6m +
Engine: Mariner 115 efi CT
MMSI: 235080598
Join Date: Jun 2011
Posts: 1,411
|
not sure about the tohatsu, but i went from a 3cyl to a 4cyl with no problem regards tacho as it gets the signal from the charging side of the stator rather than the ignition side. give bill higham a ring, he will know 
__________________
"Life may often suck, but the alternative is unacceptable"
MMSI Sticker
|
|
|
|
|
23 February 2014, 17:24
|
#6
|
|
Member
Country: UK - England
Town: liverpool
Make: tohatsu6.1 one desig
Length: 6m +
Engine: mariner 125hp
Join Date: Jan 2012
Posts: 357
|
Does the number of poles relate to the number of cylinders?
__________________
|
|
|
|
|
23 February 2014, 17:31
|
#7
|
|
Member
Country: UK - England
Town: Chorley / Holyhead
Boat name: Northwind Challenger
Make: Tornado
Length: 6m +
Engine: Mariner 115 efi CT
MMSI: 235080598
Join Date: Jun 2011
Posts: 1,411
|
no, its to do with the coils i think in the stator
__________________
"Life may often suck, but the alternative is unacceptable"
MMSI Sticker
|
|
|
|
|
23 February 2014, 17:53
|
#8
|
|
Member
Country: UK - Wales
Town: west mids /tywyn
Boat name: HAWK
Make: RIBCRAFT/ Suzuki 250
Length: 7m +
Engine: Tohatsu 3.8/15hpsuzi
MMSI: 235086594
Join Date: Apr 2008
Posts: 4,270
|
Quote:
Originally Posted by simon23
I know nothing.look.
|
http://youtu.be/hiThRIHwQDE
__________________
When you get to the end of your rope..tie a knot and hang on..!!
Aberdovey Ribs
B.I.O.C.Member
B.S. LEADER |
|
|
|
|
23 February 2014, 18:13
|
#9
|
|
Member
Country: UK - England
Town: liverpool
Make: tohatsu6.1 one desig
Length: 6m +
Engine: mariner 125hp
Join Date: Jan 2012
Posts: 357
|
Thats the one
__________________
|
|
|
|
|
23 February 2014, 18:58
|
#10
|
|
Member
Country: UK - England
Town: Chorley / Holyhead
Boat name: Northwind Challenger
Make: Tornado
Length: 6m +
Engine: Mariner 115 efi CT
MMSI: 235080598
Join Date: Jun 2011
Posts: 1,411
|
once again tony the level of help offered by your good self is quite simply overwhelming!
__________________
"Life may often suck, but the alternative is unacceptable"
MMSI Sticker
|
|
|
|
|
23 February 2014, 19:51
|
#11
|
|
Member
Country: UK - Wales
Town: west mids /tywyn
Boat name: HAWK
Make: RIBCRAFT/ Suzuki 250
Length: 7m +
Engine: Tohatsu 3.8/15hpsuzi
MMSI: 235086594
Join Date: Apr 2008
Posts: 4,270
|
Quote:
Originally Posted by Festinghouse
once again tony the level of help offered by your good self is quite simply overwhelming!
|
Cheers festa
__________________
When you get to the end of your rope..tie a knot and hang on..!!
Aberdovey Ribs
B.I.O.C.Member
B.S. LEADER |
|
|
|
|
17 March 2014, 22:03
|
#12
|
|
Member
Country: UK - England
Town: liverpool
Make: tohatsu6.1 one desig
Length: 6m +
Engine: mariner 125hp
Join Date: Jan 2012
Posts: 357
|
Quote:
Originally Posted by A1an
Can you change the pole setting on the rear of the tacho?
|
Yes
__________________
|
|
|
|
|
17 March 2014, 22:09
|
#13
|
|
Member
Country: UK - Scotland
Town: Fort William
Make: Ribcraft 585
Length: 5m +
Engine: Yamaha F115
Join Date: Mar 2012
Posts: 2,919
|
Quote:
Originally Posted by simon23
Yes
|
To save any hassle I just wired mine up, started the engine and set it on idle, I then turned the dial until the needle was sitting at the correct revs, 650-750ish.
__________________
There is a place on this planet for all of Gods creatures.........right next to my tatties and gravy.
|
|
|
|
|
17 March 2014, 22:42
|
#14
|
|
Member
Country: UK - England
Town: liverpool
Make: tohatsu6.1 one desig
Length: 6m +
Engine: mariner 125hp
Join Date: Jan 2012
Posts: 357
|
I'll try that just trying to decipher which wires on the new harness to use. There were 4 on the old one presume 2 for revs and 2 for oil light.
I think the new harness has 6/7 wires in it so may do a trim gauge to
__________________
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
All times are GMT. The time now is 03:47.
Red Mist
Northwind Challenger
