"Round 2" twin 300's e-tecs

[waterworld]

Mike Shanahan & Phillip Fitzgibbon will have a go at setting a new “official” Round Ireland Record having set the exciting official record back in august 2007 in Phillips Suzuki powered 7.5 m rib. This time we are using mikes new rib a 8.5 Valentia Island Rib “VIR” designed and built by Martin Moriarty.
Shock wave seats modified & fabricated by Martins design team
Navigation equipment Gamin & Icom
Powered by twin evenrude’s300hp e-tecs, supplied by Marine Motors cork..
Here are some pictures taking at the weekend.

[codprawn]

Good luck but I reckon you would shave a day off your time without all the extra ironmongery................

[MarkWildey]

I wouldn't have thought all that topiary above and around the seats is going to last very long in the Irish Sea. It looks like that frame would take a rain cover from a mobility scooter

Good luck

Mark

[Richard B]

BMW C1

http://images.google.co.uk/imgres?im...%3Den%26sa%3DN

Bon Voyage!

[teampulsar]

Boys, Boys, Boys,

The idea of a mobility scooter may have relevance after the event though.

I assume you are removing the A Frame and extra fuss before you take off.

Remember Rule #1: If it can fall off, it will.

Regards,


Team Pulsar.

[waterworld]

all that ironmongery is necessery,we have no console so the helm,trottles,nav epuipment,vhf & engine instruments are all on the shock wave seats. The A frame is designed for functionality the back bar you can walk out on to remove ropes it also protects the engines from fools hiting off them in small harbours, because we have no console its a good place to stow safety equipment and carry all the gps and radar dome

[gtflash]

Originally Posted by waterworld

all that ironmongery is necessery,we have no console so the helm,trottles,nav epuipment,vhf & engine instruments are all on the shock wave seats. The A frame is designed for functionality the back bar you can walk out on to remove ropes it also protects the engines from fools hiting off them in small harbours, because we have no console its a good place to stow safety equipment and carry all the gps and radar dome

what are the seats and the mods on em????????

[waterworld]

The seats are shock wave seats modfied by us to hold all the equipment that is normally on the console, driver seat in front holds the helm,trottles, two evinrude I-command gauges set on rpm and trim tabs and a garmin 5008. Nav seat holds the VHF, garmin 5010, and evinrude I-command gauges set on fuel management. Seen alot of configurations on race boats in the last 20 years but in long endurance race over 500nm I would choose comfort over an extra 3kts but with no console or extra bits the boat weighs just less than 2000 kg lite.

[Mollers]

Originally Posted by waterworld

The seats are shock wave seats modfied by us to hold all the equipment that is normally on the console, driver seat in front holds the helm,trottles, two evinrude I-command gauges set on rpm and trim tabs and a garmin 5008. Nav seat holds the VHF, garmin 5010, and evinrude I-command gauges set on fuel management. Seen alot of configurations on race boats in the last 20 years but in long endurance race over 500nm I would choose comfort over an extra 3kts but with no console or extra bits the boat weighs just less than 2000 kg lite.

Have you managed to get the Icommands to 'manage' the fuel? I haven't.

[Chris]

Hurry up and order the memory stick then

[blade]

Having seen the VIR RIB been built and it on sea trails in cork harbour it will be very hard for any competiton to come close to it. The two boys will hammer their first record. I think that they should come in early teens with the time. Hey if they do fastnet they'll be out and back before the cork crew have their sun glasses on.