Seam has lifted.

[keg]

Morning everyone,

I've noticed that one of the tube seams on my SR4 has started to lift on a corner as it comes down to the hull. It's the seam where the two sections of the tube meet rather than where the tube meets the hull and has only lifted along about 2cm.

My question is, what do i use to stick it back down with please?

Thanks

Tim

[office888]

Originally Posted by keg

Morning everyone,

I've noticed that one of the tube seams on my SR4 has started to lift on a corner as it comes down to the hull. It's the seam where the two sections of the tube meet rather than where the tube meets the hull and has only lifted along about 2cm.

My question is, what do i use to stick it back down with please?

Thanks

Tim

2-part polychloroprene / hypalon glue will do it.

On hypalon/csm/neo boats, the seam tape tends to peel up with age a little bit. This is normal.

[keg]

Sorry for the late reply, thanks to everyone for their advice.

[Superjetjim]

A great wealth of info on this site.

https://polymarineshop.com/2990-hypa...ml-tube-1.html