Seat foam

[SPR]

Looking to buy Foam to replace seat on sailing club rib, anybody know of a good supplier , looking at 20 inches x 10 x 6 or thinker.

we thinking just covering with PVC and stapling to plywood. looking for black PVC as well unless anybody has better solution !

regards

Scott

[Channel Ribs]

I got some recycled stuff that was much firmer than the usual grade to do some club boats with, I shall see if I can find where we got it from.

[Nick Hearne]

You can get it form www.feather-fibre-foam-cushions.co.uk/foam4.htm & it is chip foam you want!

[Downhilldai]

Originally Posted by SPR

looking at 20 inches x 10 x 6 or thinker.

Odd shape seats:

[SPR]

Originally Posted by Downhilldai

Odd shape seats:

ok - thicker not thinker ... waits for a picture of....

[bojit]

Hi Scott ,

You could try the foam centre in edinburgh. they will cut to size and shape .

http://www.foamcentre.org.uk/

Craig............

[SPR]

thanks for replies so far will look these folk up...as long as they sell online distance no issue...

Regards

S.

[willk]

Before you cover the foam, give it a few turns in "industrial clingfilm" - the stuff they wrap pallets with. This will help prevent the foam from becoming waterlogged.