 |
25 October 2007, 19:50
|
#1
|
Member
Country: France
Town: Côte d'Azur
Boat name: Beaver Patrol
Make: Avon Searider SR4
Length: 4m +
Join Date: Jan 2004
Posts: 5,934
|
Which hull?
Can anyone identify this hull? To me it looks like a Parker 750 rs.....
__________________
|
|
|
25 October 2007, 20:07
|
#2
|
Member
Country: France
Town: Côte d'Azur
Boat name: Beaver Patrol
Make: Avon Searider SR4
Length: 4m +
Join Date: Jan 2004
Posts: 5,934
|
Just found this image of a Parker. Any thoughts?
__________________
|
|
|
25 October 2007, 20:09
|
#3
|
Member
Country: UK - England
Town: Hamble
Length: 9m +
Join Date: Dec 2002
Posts: 2,317
|
looks like a splash of a Revenger, so it's probably a Parker or a BWM.
__________________
It is better to remain silent and be thought a fool, than to speak and remove all doubt!
|
|
|
25 October 2007, 20:11
|
#4
|
Member
Country: France
Town: Côte d'Azur
Boat name: Beaver Patrol
Make: Avon Searider SR4
Length: 4m +
Join Date: Jan 2004
Posts: 5,934
|
Do we know of anyone else who's splashed this hull?
__________________
|
|
|
25 October 2007, 20:14
|
#5
|
Member
Country: UK - England
Town: Hamble
Length: 9m +
Join Date: Dec 2002
Posts: 2,317
|
Prosport, where as your hull was nicked from someone else.
__________________
It is better to remain silent and be thought a fool, than to speak and remove all doubt!
|
|
|
25 October 2007, 20:32
|
#6
|
exspyrd trayd membir
Country: Ireland
Town: inn wiliks hed
Make: Redbay 6.5
Length: 6m +
Engine: Twin Etec 90hp
Join Date: Aug 2003
Posts: 962
|
Quote:
Originally Posted by Tim M
Do we know of anyone else who's splashed this hull?
|
ferrymann butt dis ull woz splasht inn morr waiys thann wan
__________________
luk arfter numbir wan, downt stepp inn numbir too
|
|
|
25 October 2007, 22:48
|
#7
|
Member
Country: UK - Scotland
Make: HumberOceanOffshore
Length: 8m +
Engine: Volvo KAD300/DPX
Join Date: Oct 2002
Posts: 5,596
|
Quote:
stammp owt virtewel violense... letts av sum ov de reel fing
|

Garfie, you are absolutely priceless.
__________________
JW.
|
|
|
26 October 2007, 01:30
|
#8
|
Member
Country: UK - Wales
Town: swansea
Boat name: Too Blue
Make: BLANK
Length: 8m +
Engine: Suzuki DT225
Join Date: Mar 2004
Posts: 12,791
|
I thought that was a self portrait Garf???
__________________
|
|
|
26 October 2007, 09:09
|
#9
|
Member
Country: UK - England
Town: Colchester/Clevedon
Boat name: Barracuda
Make: Porters
Length: 5m +
Engine: Tohatsu 50hp
Join Date: Oct 2006
Posts: 249
|
Quote:
Originally Posted by Tim M
Do we know of anyone else who's splashed this hull?
|
The Shakespeare 720 looks like it has Revenger origins - not suggesting it's a "splash" though, as no doubt it's legit
__________________
|
|
|
26 October 2007, 12:23
|
#10
|
Member
Country: UK - England
Town: Dartmouth
Boat name: TIDEL III
Make: AVON SEARIDER
Join Date: Jun 2003
Posts: 823
|
show the rest of the photo
__________________
|
|
|
27 October 2007, 00:02
|
#11
|
Member
Country: UK - England
Length: 5m +
MMSI: Nope
Join Date: Feb 2004
Posts: 554
|
Ferryman 8.1
In better nick than the one on Garf's pic tho'
__________________
Are we there yet?
|
|
|
27 October 2007, 07:23
|
#12
|
Member
Country: UK - England
Town: Dartmouth
Boat name: TIDEL III
Make: AVON SEARIDER
Join Date: Jun 2003
Posts: 823
|
ribeye 625/725 or vector vagabond ???
__________________
|
|
|
27 October 2007, 13:23
|
#13
|
Member
Country: France
Town: Côte d'Azur
Boat name: Beaver Patrol
Make: Avon Searider SR4
Length: 4m +
Join Date: Jan 2004
Posts: 5,934
|
Its a "Baracuda" made by some small firm whoes name escapes me right now....:
__________________
|
|
|
27 October 2007, 22:20
|
#14
|
Administrator
Country: UK - England
Town: Brighton
Length: 3m +
Join Date: May 2000
Posts: 7,110
|
From the MAIB report about the "Big Yellow" Ferryman RIB:
The hull mould from which the FRM 900 is constructed was first conceived in 1991. Blue Water Maritime (BWM) Ltd of Hamble, Hampshire was the first manufacturer to use it for their BWM Rapier 8.5 RIB.
The mould and designer later transferred to Loxton Marine in Bridport, Dorset, where, in 1998, the designer modified the hull form to incorporate a reverse chine (see Section 1.5.2). RIBs continued to be marketed as the BWM Rapier 8.5.
Loxton Marine went into receivership in the late 1990s, and the mould was sold to South Down Marine in Kilkeel, Northern Ireland where the product was advertised as the Barracuda 8.6. It is believed that only one of this type was manufactured and sold, its whereabouts is unknown. At about the same time, the RIB was once again marketed by BWM Ltd of Hamble, but was now sold as the BWM Animal.
In 2000, Parker RIBS based in Czosnow, Poland purchased an identical mould and produced a boat under their “Parker RIB 900 RS” logo.
In early 2001, Paul Ferry of Ferryman Boats Limited of Londonderry, the builder of Big Yellow, bought the mould from South Down Marine, having previously worked there. The RIB is currently marketed by Ferryman Boats Ltd as the FRM 900, and to date 13 of them have been built and sold.
John
__________________
|
|
|
28 October 2007, 08:01
|
#15
|
Member
Country: UK - England
Town: West Sussex
Length: no boat
Join Date: Oct 2002
Posts: 3,872
|
Spot on John well said.
On page 34-36 of the said report Parker Ribs are even shown as an example how that particular rib should have been built
__________________
Andre
|
|
|
28 October 2007, 10:21
|
#16
|
Member
Country: France
Town: Côte d'Azur
Boat name: Beaver Patrol
Make: Avon Searider SR4
Length: 4m +
Join Date: Jan 2004
Posts: 5,934
|
Very intertesting. So this one above is the one and only that South Down Marine made.
__________________
|
|
|
28 October 2007, 11:24
|
#17
|
Member
Country: UK - Scotland
Town: Glasgow
Boat name: stramash
Make: Tornado
Length: 5m +
Engine: Etec 90
Join Date: Feb 2006
Posts: 5,090
|
Quote:
Originally Posted by Andre
Spot on John well said.
On page 34-36 of the said report Parker Ribs are even shown as an example how that particular rib should have been built
|
Point 1.6 says at one time an owner struck a 6m by 75mm log at 20 kts on the bow .. thats a very odd size of timber ? I wonder how accurate that measurement was, and how much it contributed to the damage ... buts thats another story I'm sure. Any logs I've passed are almost totally submerged.
__________________
|
|
|
28 October 2007, 11:34
|
#18
|
Member
Country: UK - England
Town: Reading
Boat name: many
Make: BWM
Engine: inboard and outboard
Join Date: Jan 2004
Posts: 49
|
Yes John I have seen that report,
To put the record straight…
Steve Loxton (in partnership) ran a company called Loxton Marine Ltd, in 1997BWM was purchased with all of the moulds and their intellectual property rights to add to its range of products.
BWM Ribs Ltd was incorporated and Loxton Marine Ltd transferred all of their assets to BWM - later, as there was no use for Loxton Marine Ltd any longer it was wound up.
The moulds were not sold to South Down Marine or anyone else come to that and when the reverse chine was incorporated, copyright for this design was submitted.
We at BWM still own the moulds and are still producing this product – The above report was commissioned because of the actions of Ferryman Boats who somehow obtained the Rapier hull and copied it – I believe Ferryman Boats was put into liquidation shortly after the issuing of the report?
I hope this is helpful.
__________________
|
|
|
28 October 2007, 12:02
|
#19
|
RIBnet admin team
Country: UK - England
Town: The wilds of Wiltshire
Boat name: Dominator
Make: SR5.4
Length: 7m +
Engine: Yam 85
MMSI: 235055163
Join Date: Jul 2005
Posts: 13,070
|
Quote:
Originally Posted by andymr
Yes John I have seen that report,
To put the record straight…
Steve Loxton (in partnership) ran a company called Loxton Marine Ltd, in 1997BWM was purchased with all of the moulds and their intellectual property rights to add to its range of products.
BWM Ribs Ltd was incorporated and Loxton Marine Ltd transferred all of their assets to BWM - later, as there was no use for Loxton Marine Ltd any longer it was wound up.
The moulds were not sold to South Down Marine or anyone else come to that and when the reverse chine was incorporated, copyright for this design was submitted.
We at BWM still own the moulds and are still producing this product – The above report was commissioned because of the actions of Ferryman Boats who somehow obtained the Rapier hull and copied it – I believe Ferryman Boats was put into liquidation shortly after the issuing of the report?
I hope this is helpful.
|
That still leaves the question of who built the hull above then?
__________________
Need spares,consoles,consumables,hire,training or even a new boat?
Please click HERE and HERE and support our Trade Members.
Join up as a Trade member or Supporter HERE
|
|
|
 |
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|